Le Vogue

Good for: all hair types & curl patterns

• Easy barrel head replacement mechanism
• Adds volume to hair like a salon-style blowout
• Simplifies drying & styling
• Ionic technology reduces frizz
• Boosts smoothness & shine
• 43mm, 60mm, 65mm, or 75mm titanium barrel
• Combination synthetic and nylon bristles
• Easy-twist handle with LED indicator
• 3 settings: cool, low, & high
• Professional length 360° swivel cord
• Includes protective cover & cleaning brush

Specifications:

Rated Voltage: 125V
Frequency (Hz): 60Hz
Rated Wattage: 1000W
Length of A.C. Cord: 6.5 ft | 1.9 m 
Total Unit Weight With 43mm Barrel: 1.04 lb | 469 g
Total Unit Weight With 60mm Barrel: 1.32 lb | 600 g
Total Unit Weight With 65mm Barrel: 1.37 lb | 625 g
Total Unit Weight With 75mm Barrel: 1.44 lb | 656 g

Operating Instructions:

1. Remove the cover from barrel heads before turning on.
2. Plug the unit into an electrical outlet.
3. Twist the temperature control dial at the base of the handle from OFF to your desired setting (indicated by the LED light).
4. LOW setting is ideal for fine hair, HIGH setting is best for thick/coarse/textured hair, and COOL setting is best for enhancing shine and locking in your style.
5. Once you are finished styling, unplug brush dryer and wait until completely cooled before storing away in a dry place.
6. How To Change Barrel Head: Before changing barrel heads, wait for the barrel head to cool completely. To remove the barrel, push down on the lever found at the back of the handle, and turn the barrel so the unlock symbol aligns with the arrow located just above the lever. To insert a new barrel, place it onto the handle, and turn until locked in place.
7. Cleaning & Storage: To protect bristles, place the tool upright or lay over the side of the counter. After it's completely cooled, remove trapped debris with the cleaning brush and then cover with the protective cover before storing.

Styling Instructions:

1. After washing hair, towel dry to remove excess water.
2. Apply your L'ange heat protectant of choice.
3. Detangle hair prior to styling.
4. Begin styling once hair is approximately 70% dry.
5. Section and clip additional pieces of hair up and out of the way.
6. Working with a manageable section, place brush dryer underneath the hair, near the roots.
7. Hold for 2-3 seconds at your root, and working in a downward motion, slowly rotate the hair around the barrel of the brush dryer as you work from root to tip.
8. Continue until the section is dry (make sure to keep tool moving at all times).
9. If any sections near the root remain damp, insert brush dryer and hold for an additional 2-3 seconds, or until dry.
10. To create soft curls or add shape to layers, hold the brush vertically and spin in place.
11. Select the cool setting and run brush dryer through your hair to help lock-in the style.